Ready to switch things up? Rust-Oleum Switch has a unique, 5-in-1 nozzle, so you can choose from five different spray patterns with a twist of the dial. Until now, spray paints have offered a "one size fits all" approach, but that’s not always the best solution for each project. The innovative, 5-in-1 Switch aerosol offers greater precision, comfort and minimal overspray, for professional results every time and a perfect gloss black finish.
- Guarantee - Statutory
- Suitable for Brick, metal, plaster, plastic, stone & wood
- No primer required
- Instructions for Use - Preparation: Ensure surfaces to be painted are free from loose paint, rust, wax, oil and grease. Previously painted surfaces should be abraded to provide a key. Bare wood and metal should be primed with Rust-Oleum® Surface Primer. Bare plastic should be primed with Rust-Oleum® Plastic Primer. Cover surrounding areas to protect from spray mist. To ensure paint suitability test on a small inconspicuous area first. Application: Shake can vigorously for 1 minute after mixing ball begins to rattle, continue to shake regularly during use. Select the preferred spray pattern by turning the dial to one of the 5 options above. Hold can 30cm from surface and spray in a steady back and forth motion, slightly overlapping with each stroke. For best results whilst spraying keep the can the same distance from the surface and keep the can in motion and apply a light coat every 15-20 minutes until desired finish is achieved. Cleaning: After use invert can and spray for 2-3 seconds to clear the spray nozzle (repeat this step for each nozzle used by rotating the dial). Drying & Recoating: Touch dry in 15 minutes. Hard dry in 4 hours. Recoat within 1 hour or after 24 hours. Drying times are based on warm (15°C), dry application conditions with good ventilation. Lower temperatures and higher humidity will prolong the drying times.
Features and benefits
- Unique 5-in-1 nozzle for greater control. Choose from: High Output, Standard, Low Output, Vertical Fan and Horizontal Fan.
- Multi-surface. Suitable surfaces include wood, plaster, brick, stone, concrete, uPVC, ceramic, cardboard, glass, plastic* and metal*. *bare plastic and metal may require a suitable primer
- Fast drying - dries to the touch in just 15 minutes and is hard dry in 4 hours
- Interior & exterior use
- Toy Safe - Certified to BS EN 71-3: 2019+A1:2021
- 2m² coverage
- Comfortable trigger spray
- Single hazard formula
- No drips or overspray
- Trusted, high quality performance
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.